Form factor/height
|
Rack/1U |
Processor (max)
|
Intel Xeon 4C E3-1270v2 69W 3.5GHz/1600MHz/8MB/ up to 3.6 GHz/8 MB/1600 MHz, Intel Core i3 2100 series (dual-core) up to 3.4 GHz/3 MB/1333 MHz, Pentium (dual-core) up to 3.0 GHz/3 MB/1333 MHz
|
Number of processors (std/max)
|
1/1 |
Cache (max)
|
8 MB L3 |
Memory (max)
|
1 × 4 GB 1600 MHz DDR-3 UDIMM standard, maximum 32 GB via four DIMM slots |
Expansion slots
|
One PCIe x8, one PCIe x4 for hardware RAID-0, -1, compact dual-port NIC adapter (via CTO only) |
Disk bays (total/hot-swap)
|
Two 3.5 in. simple-swap SATA or four 2.5 in. hot-swap/simple-swap SAS/SATA (simple-swap 2.5 in. via CTO only) |
Maximum internal storage
|
6.0 TB, optical drive device optional |
Network interface
|
Dual Gigabit Ethernet |
Power supply (std/max)
|
IBM PS 300 W (1/1) or redundant 460 W (1/2) |
Simple-swap components
|
four 2.5 in. hot-swap/simple-swap SAS/SATA HDDs or Two 3.5 in. simple-swap SATA (model dependent) |
RAID support
|
ServeRAID-H1110 for IBM System x; hot-swap SAS model hardware RAID-0, -1 is standard (model dependent); optional hardware RAID-5 |
Systems management
|
Integrated Management Module 2 (IMM2) with IPMI 2.0 and Serial over LAN, optional upgrade to remote presence via Feature on Demand (FoD); IBM Systems Director, ServerGuide |
Operating systems supported
|
Microsoft Windows Server 2008 R2/ Microsoft Windows Server 2008, Red Hat Linux, SUSE Linux, vSphere 5.0 |
Limited warranty
|
3-year customer replaceable unit and onsite limited warranty, next business day 9×5, service upgrades available |
Introduction
The System x3250 M4 single-socket 1U rack server is designed for small businesses and first-time server buyers looking for a solution to improve business efficiency. It delivers several IBM® innovative features in a compact 1U form factor with a competitive price. The IBM System x3250 M4 provides next-generation performance in an innovative and compact design with flexible configuration options, built-in security, and systems management capabilities. This server is designed for infrastructure applications such as firewall, security, disaster recovery, name server, authentication, credit card processing, email, domain controller, and more. It leverages the next-generation dual-core and quad-core Intel Xeon processor technology.
Suggested uses: Small-to-medium businesses looking for file and printer servers, Web serving, and small business infrastructure.
Figure 1. IBM System x3250 M4
Back to top
Did you know?
The System x3250 M4 server is a compact, cost-effective, single-processor 1U rack server that has been optimized to provide outstanding availability, manageability, and performance features to small-to-medium-sized businesses, retail stores, or distributed enterprises. It supports the latest Intel Xeon E3-1200 v2 family of processors (formerly codenamed "Ivy Bridge") for applications that require performance and stability, and Core i3 processors for applications that require lower cost.
The system includes features not typically seen in this class of system, such as standard RAID-0/1 for simple-swap SATA models, remote control capabilities even when the machine is powered off, and Predictive Failure Analysis (PFA) on processor and memory. This flexible 1U rack-mountable server is also highly upgradable and expandable, scaling from low-cost, fixed-function models to feature-rich, highly available models.
Back to top
Key features
Often small-to-medium sized businesses (SMBs) have limited IT budget and resources, and rely on partners or multitalented employees to help manage the company’s network. Business needs for efficiency improvement and retention of critical data require the use of a server that is easy to get up and running quickly and is dependable. You need to squeeze as much as possible out of your IT dollars, while saving cost on features not needed in an SMB environment. The IBM System x3250 M4 is an ideal first server to meet those business needs. It was built for speed, yet eliminates costly design features found in general-purpose servers that are unnecessary for smaller businesses.
Scalability and performance
The x3250 M4 offers numerous features to boost performance, improve scalability, and reduce costs:
- The single-socket x3250 M4 supports the new quad-core Intel Xeon Processor E3-1200 v2 family of processors ("Ivy Bridge") in a compact 1U rack design.
- Choice of processors with up to 4 cores to enable the effective use of multi-threaded applications.
- Intel Xeon Processor E3-1200 v2 family supports Intel Hyer-Threading Technology (except the Xeon E3-1220L) and Intel Turbo Boost Technology 2.0 to maximize performance.
- Up to 32GB of high-speed DDR3 system memory with four DIMM sockets.
- Memory speeds up to 1600 MHz supported on models with Xeon Processor E3-1200 v2.
- Four available high-performance PCI Express 3.0 or 2.0 slots, depending on the processor selected.
- Two internal 3.5-inch simple-swap SATA II drive bays or four 2.5" hot-swap SAS/SATA drive bays (model dependent) offer low-cost/high-capacity enterprise-class storage. Up to 6TB of internal storage. Configurations with four 2.5" simple-swap drive bays available via CTO.
- Integrated ServeRAID C100 software RAID controller supports RAID 0, 1 and 10. Some models offer ServeRAID BR10il V2 or H1110 hardware RAID controller standard. Other hardware RAID options available.
- Integrated dual-port Gigabit Ethernet provides increased network throughput and redundancy with efficient slot-saving integration.
- An optional optical drive for installing software or backing up data.
- Seven USB 2.0 ports, two on the front, four on the back, and one internal for a embedded hypervisor
Availability and serviceability
The x3250 M4 provides many features to simplify serviceability and increase system uptime:
- ECC memory provides error correction not available in PC-class “servers” that use parity memory. Avoiding system crashes (and data loss) due to soft memory errors can mean greater system uptime.
- Hot-swap drives supported on some models enable failed disk drives to be replaced without powering off the server.
- Hot-swap redundant power supplies available on some models maximizes system uptime even when one power supply fails.
- Tool-less cover removal provides easy access to upgrades and serviceable parts, such as CPU, memory, and adapter cards.
- The Predictive Failure Analysis (PFA) detects when system components (for example, processors, memory, hard disk drives) operate outside of standard thresholds and generates pro-active alerts in advance of possible failure, therefore increasing uptime.
- Built-in Integrated Management Module II (IMM2) with optional upgrade to Standard and Advanced levels, continuously monitors system parameters, triggers alerts, and performs recovering actions in case of failures to minimize downtime.
- Built-in diagnostics using Dynamic Systems Analysis (DSA) Preboot speeds up troubleshooting tasks to reduce service time.
- Three-year customer replaceable unit and onsite limited warranty, next business day 9x5. Optional service upgrades available.
Manageability and security
Powerful systems management features simplify local and remote management of the x3250 M4:
- The server includes an Integrated Management Module II (IMM2) to monitor server availability and, with IMM feature upgrades, perform remote management.
- Integrated industry-standard Unified Extensible Firmware Interface (UEFI) enables improved setup, configuration, and updates, and simplifies error handling.
- Integrated Trusted Platform Module (TPM) 1.2 support enables advanced cryptographic functionality, such as digital signatures and remote attestation.
- Intel Xeon Processor E3-1200 v2 family supports Industry-standard Advanced Encryption Standard (AES) NI support for faster, stronger encryption.
- IBM Systems Director is included for proactive systems management. It offers comprehensive systems management tools that help to increase up-time, reduce costs, and improve productivity through advanced server management capabilities.
- Intel Execute Disable Bit functionality can help prevent certain classes of malicious buffer overflow attacks when combined with a supporting operating system.
Energy efficiency
The x3250 M4 offers the following energy-efficiency features to save energy, reduce operational costs, increase energy availability, and contribute to the green environment:
- Energy-efficient planar components help lower operational costs.
- Efficient 300 W 80 PLUS certified power supply or 460 W hot-swap redundant power supply options
- The Intel Xeon processor E3-1200 v2 product family offers significantly better performance over the previous generation while fitting into the same thermal design power (TDP) limits.
- Low-voltage Intel Xeon processors draw less energy to satisfy demands of power and thermally constrained data centers and telecommunication environments.
- The server uses hexagonal ventilation holes, a part of IBM Calibrated Vectored Cooling™ technology. Hexagonal holes can be grouped more densely than round holes, providing more efficient airflow through the system.
Back to top
Locations of key components and connectors
Figure 2 shows the front of the server with two 3.5-inch simple-swap drives. Some models have up to four 2.5-inch hot-swap drive bays.
Figure 2. IBM System x3250 M4 rack server (front view)
Figure 3 shows the rear of the server.
Figure 3. IBM System x3250 M4 rack server (rear view)
Figure 4 shows the locations of key components inside the server.
Figure 4. IBM System x3250 M4 rack server (inside view)
Back to top
Standard specifications
Table 1. Standard specifications
Components |
Specification |
Form factor |
1U rack system |
Processor |
One quad-core Intel Xeon E3-1200 or Xeon E3-1200 v2 series processor (up to 3.6 GHz/8 MB/1600 MHz) or one dual-core Intel Core i3 2100 series processor (up to 3.4 GHz/3 MB) with up to 1333 MHz memory speed. Supports specific quad-core and dual-core processors via Configure-To-Order (CTO). |
Memory cache |
Up to 8 MB L3 for Intel Xeon E3-1200 and E3-1200 v2 processors. Up to 3 MB L3 for Intel Core i3 2100 series processors. |
Chipset |
Intel C202. |
Memory DIMM slots |
4 DIMM slots supporting UDIMMs. RDIMMs are not supported. |
Memory capacity |
Up to 32 GB with four 8 GB DDR3 UDIMMs. |
Memory protection |
ECC. |
Disk drive bays |
Three configurations:
- Up to two 3.5" simple-swap SATA HDDs (some models)
- Up to four 2.5" hot-swap SAS HDDs (some models)
- Up to four 2.5" simple-swap SAS HDDs (CTO only)
|
Maximum internal storage |
Up to 6 TB with 3 TB SATA HDDs, or up to 2.4 TB with 600 GB SAS HDDs. Intermix of SAS/SATA is not supported. |
RAID Support |
Software RAID 0, 1 with ServeRAID C100 controller. Some models with hardware RAID 0, 1, 1E with ServeRAID-BR10il v2 or H1110. Optional RAID 5 with ServeRAID M1015. Optional RAID 5, 50 with ServeRAID M5014 and M5015. |
Optical drive bays |
One, support for optional DVD-ROM or multiburner. |
Tape drive bays |
No internal tape drive support. |
Network interfaces |
Integrated two-port Gigabit Ethernet using Intel 82574L controller. One port is shared with IMM2. |
PCI Expansion slots |
Two PCI Express slots:
- One PCI Express 2.0 x4 (for use only by compact adapters such as the ServeRAID BR10il v2 or H1110 controllers or the Broadcom NetXtreme Dual Port Ethernet Compact Adapter)
- One PCI Express 3.0 x8, full-height, half-length (PCIe 2.0 in models with processors announced September 2011 - see Table 4)
|
External ports |
Front: Two USB 2.0 ports
Rear: Four USB 2.0, one DB-15 video, one DB-9 serial, two RJ-45 Gigabit Ethernet network ports (one is dedicated, one is shared with IMM2)
Internal: One USB 2.0 port for embedded hypervisor |
Cooling |
IBM Calibrated Vectored Cooling™ with 4 fans and N+1 redundancy. |
Power supply |
One fixed 300 W AC power supply; or up to two redundant 460 W AC power supplies (model dependent) |
Hot-swap components |
Hot-swap SAS drives (some models) |
Systems management |
UEFI, IBM Integrated Management Module II (IMM2), Predictive Failure Analysis, Automatic Server Restart, IBM Systems Director and IBM Systems Director Active Energy Manager™, IBM ServerGuide. |
Security features |
Power-on password, administrator's password, Trusted Platform Module (TPM). |
Video |
Matrox G200eR2 with 16 MB memory integrated into the IMM2. Maximum resolution is 1600x1200 at 75 Hz with 16 M colors. |
Operating systems supported |
Microsoft Windows Server 2008 R2 and 2008, Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.1, ESXi 4.1, vSphere 5 |
Limited warranty |
Three-year (2583) customer-replaceable unit and onsite limited warranty with 9x5/next-business-day (NBD) response time. |
Service and Support |
Optional service upgrades are available through IBM ServicePacs®: 24x7/NBD or four hours onsite repair, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software. |
Dimensions |
Height: 43 mm (1.7 in), width: 439 mm (17.3 in), depth: 576 mm (22.7 in) |
Weight |
Minimum configuration: 9.3 kg (20.4 lb), maximum configuration: 10.7 kg (23.5 lb) |
The x3250 M4 server ships with the following items:
- Statement of Limited Warranty
- Important Notices
- Rack installation instructions
- Documentation CD that contains the Installation and User's Guide
- IBM Systems Director 6.2 Base for x86 DVD-ROM
- Rack Mount Kit
- One 2.8 m C13 - C14 power cord
Back to top
Standard models
The following table lists the standard models.
Table 2. Standard models
Model |
Intel Processor*
(one maximum) |
Memory |
ServeRAID
controller |
Disk bays |
Disks |
Network |
Optical |
Power
supply |
Models announced May 2012 |
2583-A2x |
1x Corei3-2120 3.3GHz
2C 3 MB 1333 MHz 65W |
1x 4 GB
(1333 MHz)† |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-B2x |
1x Xeon E3-1220v2 3.1 GHz
4C 8MB 1600 MHz 69W |
1x 4 GB
1600 MHz |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-C2x |
1x Xeon E3-1230v2 3.3GHz
4C 8MB 1600 MHz 69W |
1x 4 GB
1600 MHz |
H1110 |
4x 2.5" HS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-F2x |
1x Xeon E3-1270v2 3.5GHz
4C 8MB 1600 MHz 69W |
1x 4 GB
1600 MHz |
H1110 |
4x 2.5" HS |
Open |
2x GbE |
Optional |
1x 460 W
redundant |
Models announced September 2011 |
2583-32x |
1x Pentium G850 2.9 GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB
1333 MHz |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-42x |
1x Corei3-2100 3.1 GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB
1333 MHz |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-62x |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 80W |
1x 2 GB
1333 MHz |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Optional |
1x 300 W |
2583-72x |
1x Xeon E3-1270 3.4 GHz
4C 8 MB 1333 MHz 80W |
1x 4 GB
1333 MHz |
BR10il v2 |
4x 2.5" HS |
Open |
2x GbE |
Optional |
1x 460 W
redundant |
* Processor detail: Processor quantity, processor model, core speed, number of cores, L3 cache, memory speed, thermal design power (TDP) rating
† For models A2x, the standard DIMM is rated at 1600 MHz, but operates at up to 1333 MHz to match the processor memory speed.
Back to top
Express models
The following table lists the Express models that are available in certain regions. Express models are preconfigured with additional components such as processors, memory, and disks with the purpose of making the ordering and installation process simpler.
Table 3. Express models
Model |
Intel Processor*
(one maximum) |
Memory |
ServeRAID
controller |
Disk bays |
Disks |
GbE |
Optical |
Power
supply |
North America (NA) |
2583-ECU |
1x Xeon E3-1220v2 3.1 GHz
4C 8 MB 1600 MHz 69W |
1x 4 GB |
C100 |
4x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-EDU |
1x Xeon E3-1230v2 3.3 GHz
4C 8 MB 1600 MHz 69W |
1x 4 GB |
C100 |
4x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 460 W
Redundant |
2583-EAU |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-EBU |
1x Xeon E3-1230 3.2 GHz
4C 8 MB 1333 MHz 65W |
1x 4 GB |
BR10il V2 |
4x 2.5" HS |
Open |
2x GbE |
Multiburner |
1x 460 W
redundant |
Latin America (LA) |
2583-ECU |
1x Xeon E3-1220v2 3.1 GHz
4C 8 MB 1600 MHz 69W |
1x 4 GB |
C100 |
4x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-EDU |
1x Xeon E3-1230v2 3.3 GHz
4C 8 MB 1600 MHz 69W |
1x 4 GB |
C100 |
4x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 460 W
Redundant |
2583-EAU |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
2x 250G |
2x GbE |
Multiburner |
1x 300 W |
2583-EBU |
1x Xeon E3-1230 3.2 GHz
4C 8 MB 1333 MHz 65W |
1x 4 GB |
BR10il V2 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 460 W
redundant |
Europe Integrated Operating Team (IOT) |
2583-E1G |
1x Corei3-2100 3.1 GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-E2G |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-E3G |
1x Xeon E3-1230 3.2 GHz
4C 8 MB 1333 MHz 65W |
1x 4 GB |
C100 |
2x 3.5" SS |
1x 250G |
2x GbE |
Multiburner |
1x 300 W |
2583-K1G |
1x Pentium G850 2.9GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
1x 250G |
2x GbE |
Multiburner |
1x 300 W |
2583-K4G |
1x Xeon E3-1240 3.3 GHz
4C 8 MB 1333 MHz 80W |
1x 4 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
Central and Eastern Europe (CEE) and Middle East & Africa (MEA) |
2583-E1G |
1x Corei3-2100 3.1 GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-E2G |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-E3G |
1x Xeon E3-1230 3.2 GHz
4C 8 MB 1333 MHz 65W |
1x 4 GB |
C100 |
2x 3.5" SS |
1x 250G |
2x GbE |
Multiburner |
1x 300 W |
2583-K1G |
1x Pentium G850 2.9GHz
2C 3 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
1x 250G |
2x GbE |
Multiburner |
1x 300 W |
Russia/Commonwealth of Independent States (CIS) |
2583-E2G |
1x Xeon E3-1220 3.1 GHz
4C 8 MB 1333 MHz 65W |
1x 2 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
2583-E4G |
1x Xeon E3-1240 3.3 GHz
4C 8 MB 1333 MHz 80W |
1x 4 GB |
C100 |
2x 3.5" SS |
Open |
2x GbE |
Multiburner |
1x 300 W |
* Processor detail: Processor quantity, processor model, core speed, number of cores, L3 cache, memory speed, thermal design power (TDP) rating
Back to top
Processor options
The server supports only one processor, which is already installed in all standard and Express models. No additional processor options are available. The following table lists all processors available in standard models of x3250 M4 or via CTO. If there is no corresponding where-used model for a particular processor, then that processor is only available through the configure-to-order (CTO) process.
Table 4. Processor options
Feature code* |
Description** |
Standard models
where used |
Processors announce September 2012 |
A38R |
Intel Core i3-3220 3.3GHz 2C 3MB 1600MHz 55W |
- |
A38S |
Intel Core i3-3220T 2.8GHz 2C 3MB 1600MHz 35W |
- |
A38P |
Intel Core i3-3240 3.4GHz 2C 3MB 1600MHz 55W |
- |
A38Q |
Intel Core i3-3240T 2.9GHz 2C 3MB 1600MHz 35W |
- |
A38U |
Intel Pentium G2100T 2.6GHz 2C 3MB 1600MHz 35W |
- |
A38T |
Intel Pentium G2120 3.1GHz 2C 3MB 1600MHz 55W |
- |
Processors announce May 2012 |
A2V0 |
Intel Xeon E3-1220v2 3.1GHz 4C 8MB 1600 MHz 69W |
B2x |
A2UZ |
Intel Xeon E3-1230v2 3.3GHz 4C 8MB 1600 MHz 69W |
C2x |
A2UY |
Intel Xeon E3-1240v2 3.4GHz 4C 8MB 1600 MHz 69W |
- |
A2V1 |
Intel Xeon E3-1265Lv2 2.5GHz 4C 8MB 1600 MHz 45W |
- |
A2UX |
Intel Xeon E3-1270v2 3.5GHz 4C 8MB 1600 MHz 69W |
F2x |
A2UW |
Intel Xeon E3-1280v2 3.6GHz 4C 8MB 1600 MHz 69W |
- |
A2HB |
Intel Celeron G440 1.6GHz 1C 1MB 1066 MHz 35W |
- |
Processors announced September 2011 |
A19B |
Intel Pentium G840 2.8 GHz 2C 3 MB 1333 MHz 65W |
- |
A19A |
Intel Pentium G850 2.9 GHz 2C 3 MB 1333 MHz 65W |
32x |
A2E2 |
Intel Pentium G860 3.0 GHz 2C 3 MB 1333 MHz 65W |
- |
A19C |
Intel Pentium G620 2.6 GHz 2C 3 MB 1066 MHz 65W |
- |
A2E3 |
Intel Pentium G630 2.7 GHz 2C 3 MB 1066 MHz 65W |
- |
A0RG |
Intel Corei3-2100, 3.1 GHz 2C 3 MB 1333 MHz 65W |
42x |
A145 |
Intel Corei3-2120, 3.3 GHz 2C 3 MB 1333 MHz 65W |
A2x |
A2E1 |
Intel Core i3-2130 3.4 GHz 2C 3MB 1333MHz 65W |
- |
A0RL |
Intel Xeon E3-1220 3.1 GHz 4C 8 MB 1333 MHz 80 W |
62x |
A147 |
Intel Xeon E3-1220L 2.2 GHz 2C 3 MB 1333 MHz 20 W |
- |
A0RJ |
Intel Xeon E3-1230 3.2 GHz 4C 8 MB 1333 MHz 80 W |
- |
A0RK |
Intel Xeon E3-1240 3.3 GHz 4C 8 MB 1333 MHz 80 W |
- |
A146 |
Intel Xeon E3-1260L 2.3 GHz 4C 8 MB 1333 MHz 45 W |
- |
A0RH |
Intel Xeon E3-1270 3.4 GHz 4C 8 MB 1333 MHz 80 W |
72x |
A144 |
Intel Xeon E3-1280 3.5 GHz 4C 8 MB 1333 MHz 95 W |
- |
* No additional processor options are available. The server supports only one processor, which is already included in a standard, CTO or special bid configuration.
** Processor detail: Processor quantity, processor model, core speed, number of cores, L3 cache, memory speed, thermal design power (TDP) rating
Back to top
Memory options
IBM DDR3 memory is compatibility tested and tuned for optimal System x performance and throughput. IBM memory specifications are integrated into the light path diagnostics for immediate system performance feedback and optimum system uptime. From a service and support standpoint, IBM memory automatically assumes the IBM system warranty, and IBM provides service and support worldwide.
The server has four DIMM slots, and only DDR3 ECC UDIMMs are supported. The CPU has two memory channels, and there are two DIMMs per channel.
Configuration rules:
- If more than one DIMM is planned to be installed, then DIMMs must be installed in a pair, and both DIMMs in a pair must be identical in type and size.
- The servers support 1.35V DIMMs but operate these DIMMs at 1.5V. 1.35 V and 1.5 V DIMMs cannot be intermixed.
- Models with Intel Xeon E3-1200 v2 series processors support DIMMs operating at up to 1600 MHz provided the processors support this memory speed and all DIMMs installed are rated at 1600 MHz.
The following table lists the memory options supported by the server.
Table 5. Memory options
Part
number |
Feature
code |
Description |
Maximum
supported |
Standard models
where used |
1333 MHz memory DIMMs |
44T1568 |
1915 |
1 GB (1x 1 GB, 1Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM |
4 |
- |
49Y1403 |
A0QS |
2 GB (1x2GB, 1Rx8, 1.35V) PC3L-10600 ECC DDR3 1333MHz LP UDIMM |
4 |
- |
44T1570 |
1913 |
2 GB (1x 2 GB, 1Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM |
4 |
32x, 42x, 62x |
49Y1404 |
8648 |
4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP UDIMM |
4 |
- |
44T1571 |
1912 |
4 GB (1x 4 GB, 2Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM |
4 |
72x |
90Y3165 |
A1MG |
8 GB (4Gb, 2Rx8) PC3-10600 DDR3-1333 LP UDIMM |
4 |
- |
1600 MHz memory DIMMs |
00D4955 |
A2UL |
4 GB (1x4GB, 2Rx8, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz LP UDIMM |
4 |
A2x, B2x, C2x, F2x |
00D4959 |
A2UM |
8GB (1x8GB, 2Rx8, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz LP UDIMM |
4 |
- |
Back to top
Internal disk storage options
The IBM System x3250 M4 supports the following internal disk storage configurations:
- Two 3.5-inch simple-swap SATA hard drive bays
- Four 2.5-inch hot-swap SAS/SATA drive bays
- Four 2.5-inch simple-swap SAS/SATA drive bays (CTO only)
The following table lists the hard drive options available for internal disk storage in the x3250 M4 server. Intermixing SAS and SATA drives is not supported.
Table 6. Disk drive options
Part number |
Feature
code |
Description |
Maximum
supported |
3.5" Simple-Swap SATA HDDs |
39M4514 |
5288 |
500 GB 7200 RPM 3.5" Simple-Swap SATA II |
2 |
42D0787 |
5416 |
IBM 2 TB 7200 NL SATA 3.5" SS HDD |
2 |
81Y9778 |
A280 |
IBM 3 TB 7.2K 6Gbps NL SATA 3.5" SS HDD |
2 |
2.5" Simple-Swap SAS HDDs (for CTO orders only) |
90Y8935 |
A2ZG |
IBM 146GB 15K 6Gbps SAS 2.5" SFF G2SS HDD |
4 |
49Y1996 |
5426 |
IBM 146GB 15K 6Gbps SAS 2.5" SFF SS HDD |
4 |
90Y8895 |
A2ZH |
IBM 300GB 10K 6Gbps SAS 2.5" SFF G2SS HDD |
4 |
49Y1991 |
5427 |
IBM 300GB 10K 6Gbps SAS 2.5" SFF SS HDD |
4 |
81Y9674 |
A24J |
IBM 300GB 15K 6Gbps SAS 2.5" SFF SS HDD |
4 |
90Y8890 |
A2ZJ |
IBM 600GB 10K 6Gbps SAS 2.5" SFF G2SS HDD |
4 |
49Y2027 |
5435 |
IBM 600GB 10K 6Gbps SAS 2.5" SFF SS HDD |
4 |
81Y9654 |
A24H |
IBM 900GB 10K 6Gbps SAS 2.5" SFF SS HDD |
4 |
2.5" Simple-Swap SATA HDDs (for CTO orders only) |
81Y9734 |
A1NY |
IBM 250GB 7.2K 6Gbps NL SATA 2.5" SFF SS HDD |
4 |
81Y9738 |
A1P0 |
IBM 500GB 7.2K 6Gbps NL SATA 2.5" SFF SS HDD |
4 |
81Y9742 |
A1P2 |
IBM 1TB 7.2K 6Gbps NL SATA 2.5" SFF SS HDD |
4 |
2.5" Simple-swap SSDs (for CTO orders only) |
49Y5849 |
A3AT |
IBM 64GB SATA 2.5" MLC SS Enterprise Value SSD |
4 |
49Y5854 |
A3AV |
IBM 512GB SATA 2.5" MLC SS Enterprise Value SSD |
4 |
2.5" Hot-Swap SAS HDDs |
90Y8926 |
A2XB |
IBM 146GB 15K 6Gbps SAS 2.5" SFF G2HS HDD |
4 |
90Y8944 |
A2ZK |
IBM 146GB 15K 6Gbps SAS 2.5" SFF G2HS SED |
4 |
42D0677 |
5536 |
IBM 146GB 15K 6Gbps SAS 2.5" SFF Slim-HS HDD |
4 |
90Y8877 |
A2XC |
IBM 300GB 10K 6Gbps SAS 2.5" SFF G2HS HDD |
4 |
90Y8913 |
A2XF |
IBM 300GB 10K 6Gbps SAS 2.5" SFF G2HS SED |
4 |
42D0637 |
5599 |
IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD |
4 |
81Y9670 |
A283 |
IBM 300GB 15K 6Gbps SAS 2.5" SFF HS HDD |
4 |
90Y8872 |
A2XD |
IBM 600GB 10K 6Gbps SAS 2.5" SFF G2HS HDD |
4 |
49Y2003 |
5433 |
IBM 600GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD |
4 |
90Y8908 |
A3EF |
IBM 600GB 10K 6Gbps SAS 2.5" SFF G2HS SED |
4 |
81Y9650 |
A282 |
IBM 900GB 10K 6Gbps SAS 2.5" SFF HS HDD |
4 |
81Y9662 |
A3EG |
IBM 900GB 10K 6Gbps SAS 2.5" SFF G2HS SED |
4 |
2.5" Hot-swap NL SAS HDDs |
90Y8953 |
A2XE |
IBM 500GB 7.2K 6Gbps NL SAS 2.5" SFF G2HS HDD |
4 |
42D0707 |
5409 |
IBM 500GB 7200 6Gbps NL SAS 2.5" SFF Slim-HS HDD |
4 |
81Y9690 |
A1P3 |
IBM 1TB 7.2K 6Gbps NL SAS 2.5" SFF HS HDD |
4 |
2.5" Hot-swap NL SATA HDDs |
81Y9722 |
A1NX |
IBM 250GB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD |
4 |
81Y9726 |
A1NZ |
IBM 500GB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD |
4 |
81Y9730 |
A1AV |
IBM 1TB 7.2K 6Gbps NL SATA 2.5" SFF HS HDD |
4 |
2.5" Hot-swap SSDs |
49Y5839 |
A3AS |
IBM 64GB SATA 2.5" MLC HS Enterprise Value SSD |
4 |
90Y8648 |
A2U4 |
IBM 128GB SATA 2.5" MLC HS Enterprise Value SSD |
4 |
90Y8643 |
A2U3 |
IBM 256GB SATA 2.5" MLC HS Enterprise Value SSD |
4 |
49Y5844 |
A3AU |
IBM 512GB SATA 2.5" MLC HS Enterprise Value SSD |
4 |
The following table lists the RAID controllers and additional options used for internal disk storage of x3250 M4 server.
Table 7. RAID controllers for internal storage
Part number |
Feature
code |
Description |
Maximum
supported |
Standard models
where used |
Integrated |
None |
ServeRAID C100 for System x |
1 |
32x, 42x, 62x, A2x, B2x |
49Y4731 |
9742 |
ServeRAID-BR10il SAS/SATA Controller v2 |
1 |
72x |
81Y4492 |
A1XL |
ServeRAID H1110 SAS/SATA Controller |
1 |
C2x, F2x |
46M0831 |
0095 |
ServeRAID M1015 SAS/SATA Controller |
1 |
- |
46M0832 |
9749 |
ServeRAID M1000 Series Advance Feature Key |
1 |
- |
46M0916 |
3877 |
ServeRAID M5014 SAS/SATA Controller |
1 |
- |
46M0829 |
0093 |
ServeRAID M5015 SAS/SATA Controller |
1 |
- |
The ServeRAID C100 is an integrated SATA controller with software RAID capabilities. It is a cost-effective way to provide reliability, performance, and fault-tolerant disk subsystem management to help safeguard your valuable data and enhance availability. The ServeRAID C100 has the following specifications:
- Onboard SATA controller with software RAID capabilities
- Supports 3 Gbps SATA ports
- RAID levels 0, 1, and 10 support
- Support for up to two virtual drives
- Support for virtual drive sizes greater than 2 TB
- Fixed stripe unit size of 64 KB
- Support for MegaRAID Storage Manager management software
The ServeRAID BR10il v2 or H1110 is standard on some models and offers basic hardware-based RAID functionality. If either of these is used, it is installed in slot 1 (PCIe x4). Other RAID controllers are installed in slot 2 (PCIe x8) and the Broadcom NetXtreme Dual Port Ethernet Compact Adapter can be installed in slot 1 instead, if desired. Only one RAID controller can be used with the server to support internal HDDs. Features of the supported RAID controllers are discussed below.
Note: Either a ServeRAID BR10il v2, H1110, M1015, M5014, or M5015 is required for models with 2.5" simple-swap SAS drive bays or 2.5" hot-swap SAS drive bays.
The ServeRAID BR10il v2 SAS/SATA Controller has the following specifications:
- One Mini-SAS internal connector
- Supports RAID levels 0, 1, and 1E
- 3 Gbps throughput per port
- Based on the LSI 1064E controller
- PCI Express 2.0 x4 host interface
- Stripe size: 64 KB (fixed)
- Support for MegaRAID Storage Manager management software
The ServeRAID H1110 adapter has the following specifications:
- Four internal 6 Gbps SAS/SATA ports
- One x4 mini-SAS internal connector (SFF-8087)
- 6 Gbps throughput per port
- Based on the LSI SAS2004 6 Gbps RAID on Chip (ROC) controller
- PCIe 2.0 x4 host interface
- Supports RAID 0, 1, 1E, and 10
- Connects to up to four SAS or SATA drives (SAS expanders are not supported.)
The ServeRAID M1015 SAS/SATA Controller has the following specifications:
- Two Mini-SAS internal connectors
- Supports RAID levels 0, 1, and 10
- Supports RAID levels 5 and 50 with optional ServeRAID M1000 Series Advanced Feature Key
- 6 Gbps throughput per port
- Based on the LSI SAS2008 6 Gbps RAID on Chip (ROC) controller
- PCI Express 2.0 x8 host interface
- Configurable stripe size up to 64 KB
The ServeRAID M5014 SAS/SATA Controller has the following specifications:
- Two Mini-SAS internal connectors
- Supports RAID levels 0, 1, 5, 10, and 50
- 6 Gbps throughput per port
- PCI Express 2.0 x8 host interface
- Based on the LSI SAS2108 6 Gbps RAID on Chip (ROC) controller
- 256 MB of onboard cache
The ServeRAID M5015 SAS/SATA Controller has the following specifications:
- Two Mini-SAS internal connectors
- Supports RAID levels 0, 1, 5, 10, and 50
- Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
- Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key
- 6 Gbps throughput per port
- PCI Express 2.0 x8 host interface
- Based on the LSI SAS2108 6 Gbps ROC controller
- 512 MB of onboard cache
- Standard Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention
For more information, see the list of IBM Redbooks Product Guides in the RAID adapters category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=raid
Back to top
Internal tape drives
The server does not support internal tape drive options.
Back to top
Optical drives
The server supports the optical drive options listed in the following table.
Table 8. Optical drives
Part number |
Feature
code |
Description |
Maximum
supported |
Standard models
where used |
46M0901 |
4161 |
IBM UltraSlim Enhanced SATA DVD-ROM |
1 |
- |
46M0902 |
4163 |
UltraSlim Enhanced SATA Multi-Burner |
1 |
- |
IBM UltraSlim Enhanced SATA DVD-ROM (part number 46M0901) supports the following media and speeds for reading:
- CD-ROM 24X
- CD-DA (DAE) 20X
- CD-R 24X
- CD-RW 24X
- DVD-ROM (single layer) 8X
- DVD-ROM (dual layer) 8X
- DVD-R (4.7 GB) 6X
- DVD-R DL 4X
- DVD+R 6X
- DVD+R DL 4X
- DVD-RW (4.7 GB) 4X
- DVD+RW 4X
- DVD-RAM (4.7/9.4 GB) 4X
IBM UltraSlim Enhanced SATA Multi-Burner (part number 46M0902) supports the same media and speeds for reading as DVD-ROM (46M0901). In addition, this drive supports the following media and speeds for writing:
- CD-R 24X
- CD-RW 4X
- High Speed CD-RW 10X
- Ultra Speed CD-RW 16X
- Ultra Speed Plus CD-RW 16X
- DVD-R 8X
- DVD-R DL 6X
- DVD+R 8X
- DVD+R DL 6X
- DVD-RW 6X
- DVD+RW 8X
- DVD-RAM 5X
Back to top
I/O expansion options
The server offers two PCI Express slots (one x4 and one x8). The slot form-factors are:
- Slot 1: PCIe 3.0 x4 (for use only by compact adapters such as the ServeRAID BR10il v2 or H1110 controllers or the Broadcom NetXtreme Dual Port Ethernet Compact Adapter)
- Slot 2: PCIe 3.0 x8, full-height, half-length (PCIe 2.0 in models with processors announced September 2011 - see Table 4)
Back to top
Network adapters
The x3250 M4 offers two integrated Gigabit Ethernet ports. One port is shared with Integrated Management Module (IMM).
The Integrated NICs have the following features:
- Intel 82574L chip
- TCP/UDP, IPv4, and IPv6 checksum offloads
- TCP Segmentation/Transmit Segmentation Offloading (TSO)
- Wake on LAN support
- 802.1Q VLAN tagging support
- Support for jumbo frames up to 9 KBytes
- NIC Teaming (Load Balancing and Failover) with Intel PROSet software
The Broadcom NetXtreme Dual Port Ethernet Compact Adapter, SBB 90Y5381, feature code A1R5, is designed to fit in Slot 1 of the x3250 M4 server, thereby freeing up the PCIe x8 slot for other purposes. Use this adapter when you don't have the ServeRAID BR10il v2 or H1110 controller configured as it occupies the same slot. The Broadcom NetXtreme Dual Port Ethernet Compact Adapter is available CTO or special bid only and has these features:
- Broadcom 5718 ASIC
- Full-duplex (FDX) capability
- IEEE 802.3x FDX flow control
- I/O virtualization support for VMware NetQueue and Microsoft VMQ
- Function Level Reset (FLR)
- IPv4/IPv6 offload: TCP, IP, and UDP checksum offload
- Large send offload (LSO)
- TCP segmentation offload (TSO)
- Receive side scaling (RSS)
- Transmit-side scaling (TSS)
- IEEE 802.1Q VLAN tagging
- VLAN insertion and extraction
- Jumbo frames up to 9,600 bytes
- NIC Teaming (Load Balancing and Failover) with other Broadcom NX or NX2 adapters
- Wake On LAN support
- Message Signal Interrupt (MSI-X) support
Note: TCP Offload Engine (TOE) is not supported by the Broadcom NetXtreme Dual Port Ethernet Compact Adapter.
The following table lists additional supported network adapters. All adapters are supported only in Slot 2 with the exception of the Broadcom NetXtreme Dual Port Ethernet Compact Adapter which is installed in Slot 1.
Table 9. Network adapters
Part number |
Feature
code |
Description
(all install in slot 2 except where noted) |
Maximum
supported |
10 Gb Ethernet |
49Y7970 |
A2ED |
Intel X540-T2 Dual Port 10GBase-T Adapter for IBM System x |
1 |
95Y3762 |
A2U1 |
Emulex 10 GbE Virtual Fabric Adapter III for IBM System x |
1 |
42C1820 |
1637 |
Brocade 10 Gb Dual-port CNA for IBM System x |
1 |
42C1800 |
5751 |
QLogic 10 Gb Dual Port CNA for IBM System x |
1 |
Gigabit Ethernet |
None* |
A1R5 |
Broadcom NetXtreme Dual Port Ethernet Compact Adapter (installs in slot 1) |
1 |
90Y9352 |
A2V3 |
Broadcom NetXtreme I Quad Port GbE Adapter for IBM System x |
1 |
42C1780 |
2995 |
NetXtreme II 1000 Express Dual Port Ethernet Adapter |
1 |
49Y4220 |
5766 |
NetXtreme II 1000 Express Quad Port Ethernet Adapter |
1 |
49Y4230 |
5767 |
Intel Ethernet Dual Port Server Adapter I340-T2 for IBM System x |
1 |
49Y4240 |
5768 |
Intel Ethernet Quad Port Server Adapter I340-T4 for IBM System x |
1 |
* This adapter is available via CTO or special bid only
For more information, see the list of IBM Redbooks Product Guides in the Networking adapters category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=networkadapters
Back to top
Storage host bus adapters
The following table lists the storage host bus adapters (HBAs) supported by x3250 M4 server.
Table 10. Storage adapters
Part number |
Feature
code |
Description |
Maximum
supported |
Fibre Channel |
81Y1655 |
A2W5 |
Emulex 16Gb FC Single-port HBA for IBM System x |
1 |
81Y1662 |
A2W6 |
Emulex 16Gb FC Dual-port HBA for IBM System x |
1 |
81Y1668 |
A2XU |
Brocade 16Gb FC Single-port HBA for IBM System x |
1 |
81Y1675 |
A2XV |
Brocade 16Gb FC Dual-port HBA for IBM System x |
1 |
46M6049 |
3589 |
Brocade 8 Gb FC Single-port HBA for IBM System x |
1 |
46M6050 |
3591 |
Brocade 8 Gb FC Dual-port HBA for IBM System x |
1 |
42D0485 |
3580 |
Emulex 8 Gb FC Single-port HBA for IBM System x |
1 |
42D0494 |
3581 |
Emulex 8 Gb FC Dual-port HBA for IBM System x |
1 |
42D0501 |
3578 |
QLogic 8 Gb FC Single-port HBA for IBM System x |
1 |
42D0510 |
3579 |
QLogic 8 Gb FC Dual-port HBA for IBM System x |
1 |
Converged Network Adapters (CNA) |
42C1820 |
1637 |
Brocade 10 Gb Dual-port CNA for IBM System x |
1 |
42C1800 |
5751 |
QLogic 10 Gb Dual Port CNA for IBM System x |
1 |
SAS |
46M0907 |
5982 |
IBM 6 Gb SAS HBA Controller |
1 |
For more information, see the list of IBM Redbooks Product Guides in the Host bus adapters category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=hba
Back to top
PCIe SSD adapters
The server does not support the High IOPS SSD adapters.
Back to top
Power supplies
Some models include one fixed 300 W AC 80 PLUS-certified power supply. This 300 W unit cannot be upgraded. Some models include one IBM 460W hot-swap power supply. With the addition of a second power supply, the two form a redundant pair. The following table lists the option for the second power supply.
Table 11. Power supply option
Part number |
Feature
code |
Description |
94Y6236 |
A2E8 |
IBM 460W Redundant Power Supply |
Both the 300W and 460W power supply units support maximum configurations and support auto restart that minimizes operator intervention after a temporary power outage.
One 2.8-m C13 - C14 power cord is shipped for each included power supply.
Back to top
Integrated virtualization
The server supports VMware ESXi installed on a USB memory key. The key is installed in a USB socket inside the server. Table 15 lists the virtualization options.
Table 12. Virtualization options
Part number |
Feature
code |
Description |
Maximum
supported |
41Y8298 |
A2G0 |
IBM Blank USB Memory Key for VMware ESXi Downloads |
1 |
41Y8300 |
A2VC |
IBM USB Memory Key for VMware ESXi 5.0 |
1 |
41Y8307 |
A383 |
IBM USB Memory Key for VMware ESXi 5.0 Update1 |
1 |
Back to top
Remote management
The server contains IBM Integrated Management Module II (IMM2), which provides advanced service-processor control, monitoring, and an alerting function. If an environmental condition exceeds a threshold or if a system component fails, the IMM2 lights LEDs to help you diagnose the problem, records the error in the event log, and alerts you to the problem. The server includes IMM2 Basic and can be upgraded to IMM2 Standard and IMM2 Advanced with Feature on Demand (FoD) licenses, however, you may need to upgrade system firmware to the latest levels (at least level 28n) to support these upgrades.
IMM2 Basic has the following features:
- Industry-standard interfaces and protocols
- Intelligent Platform Management Interface (IPMI) Version 2.0
- Common Information Model (CIM)
- Advanced Predictive Failure Analysis (PFA) support
- Continuous health monitoring
- Choice of a dedicated or shared Ethernet connection
- Domain Name System (DNS) server support
- Dynamic Host Configuration Protocol (DHCP) support
- Embedded Dynamic System Analysis (DSA)
- LAN over USB for in-band communications to the IMM
- Serial over LAN
- Server console serial redirection
IMM2 Standard (as enabled using the Feature on Demand software license key using part number 90Y3900) has the following features in addition to the IMM2 Basic features
- Remote access via a secure Web console
- Access to server vital product data (VPD)
- Automatic notification and alerts
- Continuous health monitoring and control
- E-mail alerts
- Syslog logging support
- Enhanced user authority levels
- Event logs that are time stamped, saved on the IMM, and that can be attached to e-mail alerts
- OS watchdogs
- Remote configuration through Advanced Settings Utility (ASU)
- Remote firmware updating
- Remote power control
- User authentication using a secure connection to a Lightweight Directory Access Protocol (LDAP) server
IMM2 Advanced (as enabled using the Feature on Demand software license key using part number 90Y3901) adds the following features on top of those of IMM Standard:
- Remotely viewing video with graphics resolutions up to 1600x1200 at 75 Hz with up to 23 bits per pixel color depths, regardless of the system state
- Remotely accessing the server using the keyboard and mouse from a remote client
- Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
- Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server when the IMM detects an operating-system hang condition. A system administrator can use the blue-screen capture to assist in determining the cause of the hang condition.
Note: The IMM2 Advanced upgrade requires the IMM2 Standard upgrade.
The following table lists the remote management option.
Table 13. Remote management option
Part number |
Feature
code |
Description |
Maximum
supported |
90Y3900 |
A1MK |
IBM Integrated Management Module Standard Upgrade |
1 |
90Y3901 |
A1ML |
IBM Integrated Management Module Advanced Upgrade
(requires Standard Upgrade, 90Y3900) |
1 |
Back to top
Supported operating systems
Operating systems supported by the server are:
- IBM 4690 Operating System V6
- Microsoft Windows Server 2008 Foundation
- Microsoft Windows Server 2008 R2
- Microsoft Windows Server 2008, Enterprise x64 Edition
- Microsoft Windows Server 2008, Enterprise x86 Edition
- Microsoft Windows Server 2008, Standard x64 Edition
- Microsoft Windows Server 2008, Standard x86 Edition
- Microsoft Windows Server 2008, Web x64 Edition
- Microsoft Windows Server 2008, Web x86 Edition
- Red Hat Enterprise Linux 5 Server Edition
- Red Hat Enterprise Linux 5 Server with Xen x64 Edition
- Red Hat Enterprise Linux 5 Server x64 Edition
- Red Hat Enterprise Linux 6 Server Edition
- Red Hat Enterprise Linux 6 Server x64 Edition
- SUSE LINUX Enterprise Server 10 for AMD64/EM64T
- SUSE LINUX Enterprise Server 10 for x86
- SUSE LINUX Enterprise Server 10 with Xen for AMD64/EM64T
- SUSE LINUX Enterprise Server 11 for AMD64/EM64T
- SUSE LINUX Enterprise Server 11 for x86
- SUSE LINUX Enterprise Server 11 with Xen for AMD64/EM64T
- VMware ESX 4.1
- VMware ESXi 4.1
- VMware vSphere 5
See the IBM ServerProven® website for the latest information about the specific versions and service levels supported and any other prerequisites:
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/nos/matrix.shtml
Back to top
Physical and electrical specifications
Dimensions:
- Height: 43 mm (1.7 in)
- Width: 439 mm (17.3 in)
- Depth: 576 mm (22.7 in)
- Weight:
- Minimum configuration: 9.3 kg (20.4 lb)
- Maximum configuration: 10.7 kg (23.5 lb)
Supported environment::
- Air temperature:
- Server powered on
- 10.0 to 35.0 °C (50 to 95 degrees F); altitude: 0 to 914.4 m (3,000 ft)
- 10.0 to 32.0 °C (50 to 89.6 degrees F); altitude: 914.4 m (3,000 ft) to 2,133.6 m (7,000 ft)
- Server powered off
- 10.0 to 43.0 °C (50 to 109.4 degrees F); maximum altitude: 2,133.6 m (7,000 ft)
- Shipping
- -40 to 60 °C (-40 to 140 degrees F)
- Relative humidity: 8 to 80%
- Electrical
-
- 300-watt power supply
- 100 to 127 (nominal) V ac; 50 to 60 Hz; 6.0 A (maximum)
- 200 to 240 (nominal) V ac; 50 to 60 Hz; 3.0 A (maximum)
- Redundant 460-watt power supplies
- 100 to 127 (nominal) V ac; 50 to 60 Hz; 5.3 A (maximum)
- 200 to 240 (nominal) V ac; 50 to 60 Hz; 2.6 A (maximum)
- Input kilovolt-amperes (kVA) (approximately)
- Minimum configuration: 0.044 kVA
- Maximum configuration: 0.416 kVA
- BTU output
- Ship configuration: 267 Btu/hr (78 watts)
- Full configuration: 1058 Btu/hr (310 watts)
- Acoustical noise emission level: Sound power levels
- 6.5 bels (idling)
- 6.5 bels (operating)
Back to top
Warranty options
The IBM System x3250 M4 has a 3-year onsite warranty with 9x5/next-business-day terms. IBM offers warranty service upgrades through IBM ServicePacs. The IBM ServicePac is a series of prepackaged warranty maintenance upgrades and post-warranty maintenance agreements with a well-defined scope of services, including service hours, response time, term of service, and service agreement terms and conditions.
IBM ServicePac offerings are country-specific. That is, each country might have its own service types, service levels, response times, and terms and conditions. Not all covered types of ServicePacs might be available in a particular country. For more information about IBM ServicePac offerings available in your country, see the IBM ServicePac Product Selector at the following web page:
https://www-304.ibm.com/sales/gss/download/spst/servicepac
Warranty service definitions are explained in more detail in the following table.
Table 14. Warranty service definitions
Term |
Description |
IBM onsite repair (IOR) |
A service technician will come to the server's location for equipment repair. |
24x7x2 hour |
A service technician is scheduled to arrive at your customer’s location within two hours after remote problem determination is completed. We provide service around the clock, every day, including IBM holidays. |
24x7x4 hour |
A service technician is scheduled to arrive at your customer’s location within four hours after remote problem determination is completed. We provide service around the clock, every day, including IBM holidays. |
9x5x4 hour |
A service technician is scheduled to arrive at your customer’s location within four business hours after remote problem determination is completed. We provide service from 8:00 a.m. to 5:00 p.m. in the customer's local time zone, Monday through Friday, excluding IBM holidays. If after 1:00 p.m. it is determined that onsite service is required, the customer can expect the service technician to arrive the morning of the following business day. For noncritical service requests, a service technician will arrive by the end of the following business day. |
9x5 next business day |
A service technician is scheduled to arrive at your customer’s location on the business day after we receive your call, following remote problem determination. We provide service from 8:00 a.m. to 5:00 p.m. in the customer's local time zone, Monday through Friday, excluding IBM holidays. |
In general, the types of IBM ServicePacs are:
- Warranty and maintenance service upgrades
- One, 2, 3, 4, or 5 years of 9x5 or 24x7 service coverage
- Onsite repair from next business day to 4 or 2 hours (selected areas)
- One or two years of warranty extension
- Remote technical support services
- One or three years with 24x7 coverage (severity 1) or 9x5/next business day for all severities
- Installation and startup support for System x servers
- Remote technical support for System x servers
- Software support - Support Line
- Microsoft or Linux software
- VMware
- IBM Director
Back to top
Regulatory compliance
The server conforms to the following international standards:
- FCC - Verified to comply with Part 15 of the FCC Rules, Class A
- Canada ICES-003, issue 4, Class A
- UL/IEC 60950-1
- CSA C22.2 No. 69950-1-07
- NOM-019
- Argentina IEC60950-1
- Japan VCCI, Class A
- Australia/New Zealand AS/NZS CISPR 22:2009, Class A
- IEC-60950-1:2001 (CB Certificate and CB Test Report)
- Taiwan BSMI CNS 13438, Class A; CNS 14336-1
- China CCC (4943-2001), GB 9254-2008 Class A, GB 17625.1:2003
- Korea KN22, Class A; KN24
- Russia/GOST ME01, IEC-60950-1, GOST R 51318.22-99, GOST R 51318.24-99, GOST R 51317.3.2-2006, GOST R 51317.3.3-2008
- IEC 60950-1 (CB Certificate and CB Test Report)
- CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3)
- CISPR 22, Class A
- TUV-GS (EN60950-1 /IEC60950-1,EK1-ITB2000)
Back to top
External disk storage expansion
The server supports attachment to EXP3000 external storage expansion enclosures using the ServeRAID M5025 SAS/SATA Controller. The server can also be attached to supported external storage systems, such as the IBM System Storage® DS3500 series, as described in the next section below.
The ServeRAID M5025 has the following specifications:
- Two Mini-SAS external connectors
- Supports RAID levels 0, 1, 5, 10, and 50
- Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
- Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key
- 6 Gbps throughput per port
- PCI Express 2.0 x8 host interface
- Based on the LSI SAS2108 6 Gbps ROC controller
- 512 MB of onboard cache
- Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention
For more information about the M5025, see the ServeRAID M5025 SAS/SATA Controller for IBM System x Product Guide: http://www.redbooks.ibm.com/abstracts/tips0739.html?Open
The ServeRAID M5025 supports connectivity to the IBM System Storage external expansion enclosures listed in the following table. Up to nine expansion enclosures can be daisy-chained per one M5025 external port. For better performance, distribute expansion enclosures evenly across both M5025 ports.
The external disk storage expansion enclosures listed in the following table are available.
Table 15. External storage expansion enclosures
Part number |
Description |
Maximum quantity
supported per one M5025 |
172701X |
IBM System Storage® EXP3000 |
18 (9 per port) |
The external SAS cables listed in the following table support connectivity between external expansion enclosures and the controller.
Table 16. External SAS cables for external storage expansion enclosures
Part number |
Description |
Maximum quantity
supported per one enclosure |
39R6531 |
IBM 3 m SAS Cable |
1 |
39R6529 |
IBM 1 m SAS Cable |
1 |
The following table lists the drives supported by EXP3000 external expansion enclosures.
Table 17. Hard drive options for external expansion enclosures
Part number |
Description |
Maximum quantity supported
per one enclosure |
EXP3000 Hot-Swap SATA 3.5" Hard Drives |
43W7630 |
1000 GB Dual Port Hot Swap SATA |
12 |
49Y1940 |
IBM 2 TB 7200 Dual Port SATA 3.5'' HS HDD |
12 |
EXP3000 Hot-Swap SAS 3.5" Hard Drives |
44W2234 |
IBM 300 GB 15K 6 Gbps SAS 3.5" Hot-Swap HDD |
12 |
44W2239 |
IBM 450 GB 15K 6 Gbps SAS 3.5" Hot-Swap HDD |
12 |
44W2244 |
IBM 600 GB 15K 6 Gbps SAS 3.5" Hot-Swap HDD |
12 |
Back to top
External disk storage systems
The following table lists the external storage systems that are supported by the server and can be ordered through System x sales channel. The server may support other IBM disk systems that are not listed in this table.
Refer to IBM System Storage Interoperability Center for further information, http://www.ibm.com/systems/support/storage/ssic.
Table 18. External disk storage systems
Part number |
Description |
1746A2D |
IBM System Storage DS3512 Express Dual Controller Storage System |
1746A2S |
IBM System Storage DS3512 Express Single Controller Storage System |
1746A4D |
IBM System Storage DS3524 Express Dual Controller Storage System |
1746A4S |
IBM System Storage DS3524 Express Single Controller Storage System |
181494H |
IBM System Storage DS3950 Model 94 |
181498H |
IBM System Storage DS3950 Model 98 |
181492H |
IBM System Storage EXP395 Expansion Unit |
1746A2E |
IBM System Storage EXP3512 Express Storage™ Expansion Unit |
1746A4E |
IBM System Storage EXP3524 Express Storage Expansion Unit |
For more information, see the list of IBM Redbooks Product Guides in the System Storage category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=externalstorage
Back to top
External backup units
The server supports the external backup attachment options listed in the following table.
Table 19. External backup options
Part number |
Description |
External tape expansion enclosures for internal tape drives |
87651UX |
1U Tape Drive Enclosure |
8767HHX |
Half High Tape Drive Enclosure |
87651NX |
1U Tape Drive Enclosure (with Nema 5-15P LineCord) |
8767HNX |
Half High Tape Drive Enclosure (with Nema 5-15P LineCord) |
Tape enclosure adapters (with cables) |
44E8869 |
USB Enclosure Adapter Kit |
40K2599 |
SAS Enclosure Adapter Kit |
Internal backup drives supported by external tape enclosures |
46C5364 |
IBM RDX Removable Hard Disk Storage System - Internal USB 160 GB Bundle |
46C5387 |
IBM RDX Removable Hard Disk Storage System - Internal USB 320 GB Bundle |
46C5388 |
IBM RDX Removable Hard Disk Storage System - Internal USB 500 GB Bundle |
46C5399 |
IBM DDS Generation 5 USB Tape Drive |
39M5636 |
IBM DDS Generation 6 USB Tape Drive |
43W8478 |
IBM Half High LTO Gen 3 SAS Tape Drive |
44E8895 |
IBM Half High LTO Gen 4 SAS Tape Drive |
49Y9898 |
IBM Half High LTO Gen 5 Internal SAS Tape Drive |
External backup units* |
362516X |
IBM RDX Removable Hard Disk Storage System - External USB 160 GB Bundle |
362532X |
IBM RDX Removable Hard Disk Storage System - External USB 320 GB Bundle |
362550X |
IBM RDX Removable Hard Disk Storage System - External USB 500 GB Bundle |
* Note: The external tape drives listed can be ordered through System x sales channel. Server may support other IBM tape drives that are not listed in this table. Refer to IBM System Storage Interoperability Center for further information.
Internal tape drives are installed in a Half High Tape Drive Enclosure (up to one tape drive per enclosure) or in a 1U Tape Drive Enclosure (up to two tape drives). One USB Enclosure Adapter Kit is required per tape drive. (x3250 M4 only supports USB connections for internal USB tape drives in external tape enclosures.)
For more information, see the list of IBM Redbooks Product Guides in the Backup units category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=tape
Back to top
Top-of-rack Ethernet switches
The server supports the top-of-rack Ethernet switches from IBM System Networking listed in the following table.
Table 20. IBM System Networking - Top-of-rack switches
Part number |
Description |
IBM System Networking - 1 Gb top-of-rack switches |
0446013 |
IBM System Networking RackSwitch G8000R |
7309CFC |
IBM System Networking RackSwitch G8000F |
7309CD8 |
IBM System Networking RackSwitch G8000DC |
7309G52 |
IBM System Networking RackSwitch G8052R |
730952F |
IBM System Networking RackSwitch G8052F |
427348E |
IBM Ethernet Switch J48E |
6630010 |
Juniper Networks EX2200 24 Port |
6630011 |
Juniper Networks EX2200 24 Port with PoE |
6630012 |
Juniper Networks EX2200 48 Port |
6630013 |
Juniper Networks EX2200 48 Port with PoE |
IBM System Networking - 10 Gb top-of-rack switches |
0446017 |
IBM System Networking RackSwitch G8124R |
7309BF9 |
IBM System Networking RackSwitch G8124F |
7309BD5 |
IBM System Networking RackSwitch G8124DC |
7309BR6 |
IBM System Networking RackSwitch G8124ER |
7309BF7 |
IBM System Networking RackSwitch G8124EF |
7309G64 |
IBM System Networking RackSwitch G8264R |
730964F |
IBM System Networking RackSwitch G8264F |
7309CR9 |
IBM System Networking RackSwitch G8264TR |
7309CF9 |
IBM System Networking RackSwitch G8264TF |
0719410 |
Juniper Networks EX4500 - Front to Back Airflow |
0719420 |
Juniper Networks EX4500 - Back to Front Airflow |
IBM System Networking - 40 Gb top-of-rack switches |
8036ARX |
IBM System Networking RackSwitch G8316R |
8036AFX |
IBM System Networking RackSwitch G8316F |
For more information, see the list of IBM Redbooks Product Guides in the Top-of-rack switches category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=tor
Back to top
Uninterruptible power supply units
The server supports attachments to the uninterruptible power supply (UPS) units listed in the following table.
Table 21. Uninterruptible power supply units
Part number |
Description |
Rack-mounted UPS |
21304RX |
IBM UPS 10000XHV |
53951AX |
IBM 1500VA LCD 2U Rack UPS (100V/120V) |
53951KX |
IBM 1500VA LCD 2U Rack UPS (230V) |
53952AX |
IBM 2200VA LCD 2U Rack UPS (100V/120V) |
53952KX |
IBM 2200VA LCD 2U Rack UPS (230V) |
53953AX |
IBM 3000VA LCD 3U Rack UPS (100 V/120 V) |
53953JX |
IBM 3000VA LCD 3U Rack UPS (200 V/208 V) |
53956AX |
IBM 6000VA LCD 4U Rack UPS (200 V/208 V) |
53956KX |
IBM 6000VA LCD 4U Rack UPS (230 V) |
For more information, see the list of IBM Redbooks Product Guides in the Power infrastructure category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=power
Back to top
Power distribution units
The server supports attachments to the power distribution units (PDUs) listed in the following table.
Table 22. Power distribution units
Part number |
Description |
Switched and Monitored PDUs |
46M4002 |
IBM 1U 9 C19/3 C13 Active Energy Manager DPI® PDU |
46M4003 |
IBM 1U 9 C19/3 C13 Active Energy Manager 60A 3 Phase PDU |
46M4004 |
IBM 1U 12 C13 Active Energy Manager DPI PDU |
46M4005 |
IBM 1U 12 C13 Active Energy Manager 60A 3 Phase PDU |
46M4167 |
IBM 1U 9 C19/3 C13 Switched and Monitored 30A 3 Phase PDU |
46M4116 |
IBM 0U 24 C13 Switched and Monitored 30A PDU |
46M4119 |
IBM 0U 24 C13 Switched and Monitored 32A PDU |
46M4134 |
IBM 0U 12 C19/12 C13 Switched and Monitored 50A 3 Phase PDU |
46M4137 |
IBM 0U 12 C19/12 C13 Switched and Monitored 32A 3 Phase PDU |
Enterprise PDUs |
71762MX |
IBM Ultra Density Enterprise PDU C19 PDU+ (WW) |
71762NX |
IBM Ultra Density Enterprise PDU C19 PDU (WW) |
71763MU |
IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU+ (NA) |
71763NU |
IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU (NA) |
39M2816 |
IBM DPI C13 Enterprise PDU without linecord |
39Y8923 |
DPI 60A Three Phase C19 Enterprise PDU with IEC309 3P+G (208 V) fixed line cord |
39Y8941 |
DPI Single Phase C13 Enterprise PDU without line cord |
39Y8948 |
DPI Single Phase C19 Enterprise PDU without line cord |
Front-End PDUs |
39Y8934 |
DPI 32amp/250V Front-end PDU with IEC 309 2P+Gnd connector |
39Y8935 |
DPI 63amp/250V Front-end PDU with IEC 309 2P+Gnd connector |
39Y8938 |
30amp/125V Front-end PDU with NEMA L5-30P connector |
39Y8939 |
30amp/250V Front-end PDU with NEMA L6-30P connector |
39Y8940 |
60amp/250V Front-end PDU with IEC 309 60A 2P+N+Gnd connector |
Universal PDUs |
39Y8951 |
DPI Universal Rack PDU w/ US LV and HV line cords |
39Y8952 |
DPI Universal Rack PDU w/ CEE7-VII Europe LC |
39Y8953 |
DPI Universal Rack PDU w/ Denmark LC |
39Y8954 |
DPI Universal Rack PDU w/ Israel LC |
39Y8955 |
DPI Universal Rack PDU w/Italy LC |
39Y8956 |
DPI Universal Rack PDU w/South Africa LC |
39Y8957 |
DPI Universal Rack PDU w/UK LC |
39Y8958 |
DPI Universal Rack PDU with AS/NZ LC |
39Y8959 |
DPI Universal Rack PDU w/China LC |
39Y8962 |
DPI Universal Rack PDU (Argentina) |
39Y8960 |
DPI Universal Rack PDU (Brazil) |
39Y8961 |
DPI Universal Rack PDU (India) |
0U Basic PDUs |
46M4122 |
IBM 0U 24 C13 16A 3 Phase PDU |
46M4125 |
IBM 0U 24 C13 30A 3 Phase PDU |
46M4128 |
IBM 0U 24 C13 30A PDU |
46M4131 |
IBM 0U 24 C13 32A PDU |
46M4140 |
IBM 0U 12 C19/12 C13 60A 3 Phase PDU |
46M4143 |
IBM 0U 12 C19/12 C13 32A 3 Phase PDU |
For more information, see the list of IBM Redbooks Product Guides in the Power infrastructure category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=power
Back to top
Racks cabinets
The server supports the rack cabinets listed in the following table.
Table 23. Rack cabinets
Part number |
Description |
201886X |
IBM 11U Office Enablement Kit |
93072PX |
IBM 25U Static S2 Standard Rack |
93072RX |
IBM 25U Standard Rack |
93074RX |
IBM 42U Standard Rack |
93074XX |
IBM 42U Standard Rack Extension |
93084EX |
IBM 42U Enterprise Expansion Rack |
93084PX |
IBM 42U Enterprise Rack |
93604EX |
IBM 42U 1200 mm Deep Dynamic Expansion Rack |
93604PX |
IBM 42U 1200 mm Deep Dynamic Rack |
93614EX |
IBM 42U 1200 mm Deep Static Expansion Rack |
93614PX |
IBM 42U 1200 mm Deep Static Rack |
93624EX |
IBM 47U 1200 mm Deep Static Expansion Rack |
93624PX |
IBM 47U 1200 mm Deep Static Rack |
99564RX |
IBM S2 42U Dynamic Standard Rack |
99564XX |
IBM S2 42U Dynamic Standard Expansion Rack |
14102RX |
IBM eServer Cluster 25U Rack |
14104RX |
IBM Linux Cluster Rack |
201886X |
IBM 11U Office Enablement Kit |
For more information, see the list of IBM Redbooks Product Guides in the Rack cabinets and options category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=rack
Back to top
Rack options
The server supports the rack console switches and monitor kits listed in the following table.
Table 24. Rack options
Part number |
Description |
Monitor kits and keyboard trays |
172317X |
17" 1U Flat Panel Console Kit |
172319X |
19" 1U Flat Panel Console Kit |
40K5372 |
IBM Rack Mountable Keyboard & Pointing Device - 3m Cable - Black - USB - US English 103P |
40K9584 |
IBM Preferred Pro Keyboard- Full Width - 2m Cable - Black - USB - US English 103P |
40K9200 |
IBM 2 Button Optical Wheel Mouse - Black - USB |
Console switches |
17353LX |
IBM 1 x 8 Console Switch |
1754A1X |
IBM Local 1x8 Console Manager (LCM8) |
17351GX |
IBM 2x8 Local Console Manager |
17354LX |
IBM 2 x 16 Console Switch |
17352GX |
IBM Global 2x16 Console Manager |
1754A2X |
IBM Local 2x16 Console Manager (LCM16) |
1754D1X |
IBM Global 2x2x16 Console Manager (GCM16) |
1754D2X |
IBM Global 4x2x32 Console Manager (GCM32) |
Console cables |
43V6147 |
IBM Single Cable USB Conversion Option (UCO) |
39M2895 |
IBM USB Conversion Option (UCO) - 4 Pack |
39M2897 |
IBM Long KVM Conversion Option (KCO) - 4 Pack |
46M5383 |
IBM Virtual Media Conversion Option Gen2 (VCO2) |
For more information, see the list of IBM Redbooks Product Guides in the Rack cabinets and options category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=rack
Back to top
IBM Global Financing
IBM Global Financing can help you obtain the IT solution you need while preserving funding for other strategic investments and optimizing cash flow. Our Fair Market Value (FMV) lease helps ensure that you have the latest IBM technology and with our mid-lease upgrade capability, you can increase the capacity of the system with little to no change in monthly payments. At the end of the lease, take advantage of our flexible end-of-lease options to fit your changing business needs. IBM Global Financing has the breadth and depth of offerings, longevity, proven success and global reach to help you develop a robust financing and asset management strategy that provides you the opportunity to leverage new technologies and turn your ambitious vision into a tangible solution.
Here are some other reasons why working with us makes solid financial sense:
- Expand your purchasing power—Affordable monthly payments allow you to change the technology acquisition discussion from “what can I afford right now” to “what solution is really right for my business.” IBM Global Financing allows you to expand your purchase power to get you the right solution.
- Accelerate your project’s cash flow break-even point—Acquire your IBM technology today and begin to realize its benefits now. An FMV lease can help you get the solution you need now, with low monthly payments that better align upfront costs with the anticipated return on investment from the technology.
- Easy to acquire with affordable rates—We offer one-stop shopping for a total IT solution, so you can acquire IBM hardware, software, services and the financing you need—from one IT provider.
Plus, we provide simple, easy-to-understand contracts and quick approvals. As the world’s largest IT financing provider, with an asset base of US$35.8 billion and over 125,000 customers, IBM Global Financing offers highly competitive rates that promote low total cost of ownership and low monthly payments.
IBM Global Financing operates in more than 50 countries. Go to http://ibm.com/financing for financing options in your country and to contact a local financing specialist.
IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government clients. Rates and availability subject to client’s credit rating, financing terms, offering type, equipment and product type and options, and may vary by country. Non-hardware items must be one-time, non-recurring charges and are financed by means of loans. Other restrictions may apply. Rates and offerings are subject to change, extension or withdrawal without notice and may not be available in all countries. Please contact your local IBM Global Financing representative for additional detail.